The youngest driver and the most encouraging navigator, yup, you guessed it! The Dynamic duo of Savannah Rickli and Rebecca Greek attack Pikes Peak in their Mini cooper with only 200hp. Pretty crazy when you think that others in their class have more than 3 times that kind of power.
Ride along as they rocket up the mountain with only a few mishaps along the way.
Jimmy and Spencer are great friends and it is amazing to see how close they are in all the racing they do. Ride along with Jimmy as he finishes second in open wheel by only 1 second! His time is good enough for 5th fastest on the mountain a pretty awesome thing to be able to say as well!
I will be adding each of the drivers full run’s over the next week, but today we have Spencer’s. He was the fastest in the group of drivers that we had cameras on and I figured it would be nice to get his run up first. Ride along with Spencer as he claims the top rung on the podium in Open Wheel devision and also grabs the 4th fastest on the mountain. Keep your eyes peeled, he’s got a few hairy moments too!
If you haven’t seen already, check out my previous entry with video from all the cars we ran cameras on this year. Video Number one link
Yeah, I decided after working on this first video and realizing that YouTube now allows uploads over 10 minutes that I will also put together individual race runs this year. I will work on that later today actually, for now, here is the first edit from the mountain. Ride along with Spencer Steele, Jimmy Olson, Savannah Rickli, Rebecca Greek and Dave & Allison Kern. It’s quite the adventure and keep your eyes peeled the race runs were, very eventful!
Every year I go up to Pikes Peak for the hill climb and every year the adventure is a bit different. I have worn many hats on the mountain including Photographer, writer, video guy and even tour guide. This year was a bit different. My roll this year was a bit more involved with the teams and it really gave me a good look at what they have to go through to make it to the summit.
Now let me clarify, the teams that I have been spending more time with are all small budget teams. These are guys and girls that don’t have the big dollar budgets and the ones that are sometimes the most impressive on the mountain with the least amount of fanfare. This year I spend the most time with the Kerns.
Dave and Allison are a great duo of Husband and Wife, Driver and Co-Driver. They have two race cars and I am pretty familiar with nearly all the nuts and bolts on both of them now. Their BMW Compact race car you can see more info on the build on my site and the EVO is their hill climb car for Pikes Peak. They seem to always find just enough support to be able to pull off another hill climb and they don’t show up with junk. The EVO is over 600 hp at the wheels, it is very well thought out with weight reduction measures taken at any place that they implement them. It is a rocketship with tires in my opinion and in the capable hands of the dynamic duo, it is a force to be reckoned with.
The other teams, who’s cars I don’t work on, but who I spend time with instead are the teams of Spencer Steele and Jimmy Olson. I met both of these guys through Ice Racing in Georgetown and these guys, well they are best friends and some of the fastest guys on the mountain. Their budgets are reflected in their vehicles as well. Spencer has a philosophy that you don’t paint a car till you can find out what color duct tape you can buy and Jimmy, well, he’s actually driving a car for a different owner named Butch. Both of them have a collection of used tires that they have collected from other teams, they have motors that they built themselves and every part of the work on the car they have a hand in. None of these teams tuck their driver in to get a good nights sleep then go to finish work on the car, the driver is the main part of the team and is integral in making the car go both on the course and in the pits.
In the weeks leading up to PPIHC these teams were working on cars. The kerns were driving to Chicago to get a new AMS power package put into their car. Spencer was building a motor and Jimmy, well he was trying to get his own car running for the event when catastrophe struck and he ended up running in Butch’s car. Exhaustion leading up to the event is a regular thing for these guys and with minimal support a lot of this is just out of pocket expenses too. On Tuesday night, the night before practice, we were under the Kerns EVO readying the car for the next day on the mountain and though the car was mostly ready, the final touches took till nearly 11pm to get through. With a wakeup call at 2:30, that makes for a short night!
On the mountain the first day, the Kerns were battling an under steer issue. With new suspension that they hadn’t been able to test due to rained out track days, they were experimenting on the mountain with the new suspension setup and it was pushing like crazy. Spencer and Jimmy were experimenting too, but they were working with different tires. With all the new pavement on the mountain the tires that they have used in the past, the Pikes Peak Specials, seemed to be too dirt oriented and not quite as pavement friendly, so they were playing with different front tires, different rear tires and run after run you would see different things being tested.
After practice the Kerns headed off to PPIR to continue testing and tuning. The suspension needed to be changed, tire pressures needed to be dialed in and the handling needed to be corrected. After hours at the track only a minimal improvement was felt. It was clear that they were missing something, but there was still time. With that being said, I as able to ride in the car for the first time at the end of the day and experienced a vehicle that has some intense amount of power. 0-60 seems like a silly measurement in this car as you feel that you could just barely stand to drive this thing 60 when it has so much more power to go. Maybe 0-100 or 0-150 even is more appropriate!
Practice day two came about and the same tweaks were being made. The kerns were working with suspension and at the same time AMS tuner Mitch was dialing in the tune on their motor. Jimmy and Spencer were clearly testing tires on each section to see what they could figure out would be faster and I was on the side of the mountain taking video of all of them. In case you don’t remember, last year we ran cameras on most of these cars and this year we stepped that effort up quite a bit. Cameras on the cars and a lot of video from the side of the mountain as well. This is a huge undertaking so check back in a week or so and I will have our final edit up for you to check out.
After practice the kerns headed out to PPIR again, this time they had an infield spot to work on the car. Federal Tires rep Taz Yeh came out to lend a hand and his help was fantastic. His knowledge of the tires and the suspension worked out well and they were able to dial in the suspension and tire pressures to really meet Dave’s driving needs. At the end of the day we laid down a final run on the track. Fully drifting most of the turns in 3rd gear with predictable handing in an AWD car… what an impressive feeling!
Practice day three was qualifying day. This was also the only day on dirt and the dirt was LOOSE. Yeah, The kerns headed up on their newly dialed suspension and they were looking quick. 5:09 was their qualifying time which bettered their previous best qualifying time on the mountain! This was good for second qualifying position however by 4 seconds and they were sure that they could find the extra seconds on the mountain. Jimmy and Spencer were battling out in their own class. Jimmy put down a 5:00 and Spencer a 5:07. With these two guys though that difference in time was going to be cut down… You can just feel the competitive nature between these two best friends! After practice everyone was off to Fan Fest.
Saturday the teams were dialing in, changing oil and just finalizing the prep for race day. Spencer and Jimmy were aligning their cars when I stopped by and as you can imagine it was unique. Big teams, they use tire alignment machines, lasers and other goodies. Jimmy and Spencer? They have a tape measure, a retractable dog leash 4 beer cans and a stick of aluminum. Now keep in mind they have this down to a science. They use two Coors cans on the back of the alignment bar and one Coors and one Bud can on the front… since the Bud can is shorter.
Race day came and the crowds were just huge. It is great to see people recognizing the majestic nature of this mountain and this race. I was asleep at Devils Playground and when I woke up there were probably 500 cars around me. It is a great sight to see! The weather was warm but a bit windy. Overall it was a perfect day for a race and clearly a great day for the unlimited class. Monster set a new record of 9:51, Rhys at 10:09 showed that his car was really capable on the mountain in only two years of running that car and Jean Phillipe had a very impressive appearance at 10:17 which is amazing for the first year on the mountain at all!
The Kerns were poised to break their own record. They headed up the mountain and as they did I turned my radio off. I didn’t want any of that audio on my video. So I waited. They passed by and when I saw their car my heart dropped. Something’s wrong. I turned the radio back on and found that they had crashed at ragged edge and later found out that they crashed, lost a headlight, lost a side skirt, tore a hole in their front suspension and tore the tire on their rear wheel. By the time they got to Cog Cut the were running on a rim and when they got to the top at 12:12 they found that they had just placed 4th in their class… 15 seconds down from the leader while running a flat for the last 5-6 miles of the race. Pretty amazing if you ask me, especially when the race is 12.42 miles long!
Jimmy and Spencer were battling it out as well. Both passed by at a crazy amount of speed and in the end they were separated by 1 second. 1 SECOND! It is incredible. Spencer took the win; Jimmy took second with Spencer’s time being 10:42. Now, here is a little detail for you. This is what impresses me the most. Spencer’s time of 10:42 was set in a car running used tires, a home made motor and duct tape nose cone. This is a homemade project with nearly no support. Spencer’s time was good for 4th fastest overall time on the mountain. This is up with cars that have hundreds of thousands of dollars wrapped up in them. Cars that show up with a crew of mechanics and specialists. Both his time and Jimmy’s time is just incredible to me when you look at the budgets involved. This is what makes Pikes Peak most impressive to me I love that a team with a car built in their garage can show up and challenge the biggest budget factory teams. I think it is an incredible race when money doesn’t dominate and experience skill can win. This really makes this race awesome to me and I am pretty fortunate to have the ability to spend time with these guys and experience the race through their eyes!
I will have a video up from all of these cars and more very soon, in the mean time, check out some quick teasers…
Three days of practice are done. Qualifying has happened and the results are online. The Kerns have been dialing in the vehicle all week. With a major change in suspension this year in response to the added tarmac the testing to dial in the suspensions performance is critical. We were finally able to get it dialed in to Dave’s needs on Thursday night.
This year Dave and Allison have been supported by AMS again for his engine setup, tuning etc. They have also been picked up by Federal Tires. One of the nice things about both of these sponsors is that they are here, they are hands on and they are bringing their own setup experience. So out at PPIR this week while testing they have been hands on, talking about suspension setups, tire pressures engine setup and more. It has been a very interesting experience and I can’t imagine that we would have gotten the setup to dave’s liking as quickly without them.
As we were heading out Dave Carapetyan’s crew rolled up with his newly built Unlimited car. So new in fact that it didn’t get to practice all week.
They were in for a late night and said they were hoping to be at practice on Friday however a blown head gasket held them back from that goal.
We’ve been shooting video all week as well, as you may remember from last year, we are doing a similar project again this year. Spencer Steel, Jimmy Olson, Savannah Rickli and Dave & Allison Kern are all participating and we may even have some video from a motorcyclist, Darryl Lujan. So far I have a ton of video.. I mean seriously, I can’t get through it all just yet, but I can show you a bit of a Teaser… So check this out.
First off, I have to say, it is substantially harder to “cover” PPIHC and also help as a half assed crew member than I anticipated… but… Oh well all 17 of you that read this will just have to deal with the lack of photos!
I arrived on Tuesday evening and rolled down to see a pretty relaxed looking Dave and Allison Kern. Sitting down to dinner, taking a moment away from the car. This was already starting out quite a bit different than the 2010 season for them. Now don’t think for a second that there wasn’t anything to do, that everything was done. This is racing and everything is NEVER done! After a bit of dinner tending to the details began. Final adjustment of the front splitter using prefabricated mounting hardware (doorstops from home depot) finalizing venting locations and mounting for the front brakes and on top of that we had a few cameras to mount and well… some decals to install!
The work continued until nearly 11 since we also did a few things to another competitors car. Tom of Wright Group Event Services. They are a sponsor of Dave and Allison’s car and, he has an evo too, which made fitting the Kerns spare exhaust onto it that much easier.
Once both cars were buttoned up we packed it in and practice began. 2:30am is a tough time to wake up, but I managed and got onto the mountain. There is definitely something awesome about that mountain. Sitting there waiting for the sun to rise from 12k ft is a beautiful sight that I can’t get enough of. This year I am shooting primarily VIDEO. yes, you may have seen shots from last years effort with Spencer and Jimmy, but this year I am doing my best to shoot some exterior shots and I will be putting together something with the onboard footage we will have very soon. Definitely check back, it should be pretty awesome.
After practice we shot a few shots on the mountain for the Kern’s Promo use. Allison was already in her street clothes so she decided to sit out the photoshoot.
The Kerns headed out for more testing and tuning at PPIR. Dialing in suspension settings, tire pressures etc. This is critical. It is amazing to think about how much work goes into a race week. The spectators come home, exhausted, crash for a few hours and then venture back into the world, the racers, well they are constantly working. tweaking, tuning and when all that is done… cleaning! I joined them to help out any way I could. To be honest I was mostly in the way this time. AMS tuners Mitch and Martin were there turning wrenches, recording data, doing math. Lots of stuff that I just simply didn’t want to mess up so I stepped back and observed. At the end of the session Dave told me to hop in and took me for a ride. Wow that thing is fast. I can’t say that I have experienced that kind of speed in a vehicle that was designed to stay on the ground!
Day two came and went as well. The upper practice section of the course is the most freshly paved section. Many have been wondering what it is going to do to the race and honestly it is kinda interesting. The biggest problem with the paved sections? Well that would be the dirt! Race cars use ALL of the track so kicking up a bit of dirt here and there is pretty common, On a dirt surface you have a speed and a constant surface. On pavement this dirt from the sides of the road that ends up on the middle of the road turns the road to “unpredictable.” You can’t just trust that the car is going to take what you throw at it because you may be throwing it at pavement and you may throw it at marbley gravel. You just can’t know. This bit a few folks in the butt today, we watched several take some quick trips off course, but I don’t believe any were serious crashes.
I don’t have as many photos as normal, but here is a quick shot or two from the end of today.
Of course I have one quick video clip from today. I happened to get a quick shot of Bill Caswell rallying a corner up high at Gravel pit today!
In other news, Photographer Joel Yust has been developing new salsa to test the mettle of teams on the mountains. Grant, from SCR Performance stepped up to the plate. “A half an hour later and it got hot in my mouth again!”
Every year I head up to Pikes Peak to follow the Pikes Peak international Hill Climb. This is one of the most incredible races in the world. It is followed regularly by people across the globe and competitors are frequently coming in from everywhere in order to challenge the mountain.
This year I was able to head up to check out the practice day. Each year they have one practice weekend for teams that are willing and able to pay an additional fee to get some practice on the road. This is great because they get to run a half of the road at a time rather than 1/3rd of the road during the race week. You only ever can run the full road on race day, one time a year… this is part of the addiction!
This race is pretty incredible, you have the opportunity to experience one of the most incredible views, a sight from 14000 ft with the sun rising and the landscape turning from shadows to colors is pretty fascinating to watch. As you stand on the mountain the cold wraps around you, it always is colder than you think. How could it be 20 degrees when it is 90 down in town? Well, you never know what the mountain will dish out!
Each year I have put together a bit of video from the events. This Year is no different. Here is a quick teaser from today, but keep checking back. I will be making another video after the race this year that I hope will show off a lot of the race.
I don’t know why I forget this stuff, but I am remembering how much work making a mold is… Yeah. It is one of those things that I remember when I really think about it, but when I haven’t done it for a while I convince myself that it will just take a few hours.
If you haven’t seen part one of this build check it out here. This time I have been going layer after layer, working my way up and trying to get a nice smooth final product. There have been some tricky parts like the airbag area and the vent holes. In addition the portion that I have made with foam is a bit tricky as well, occasionally when you get beyond the bondo layer you find out what happened very quickly when you hit the soft foam! I reached a point where I needed a much better visual indicator of what was going on. So I had to put a coat of glossy paint on in order to see the lines better than I could with the flat primer. So I chose a red paint and painted it up. It gave away some issues immediately. There were some sanding marks that were a bit deeper than anticipated, some waves that I needed to sort out and basically it just did exactly what it needed to do.
So I did a full wet sand on the part and really smoothed it out. some spots got all the way back to bondo again through the paint layer and the primer layer. Once I got it all smoothed out another layer of glossy red and WOW! what a difference! It looks very good right now. There are a few little imperfections, they are all pits and will actually be easier to fix in the mold itself so I am going to leave them and sand them out of the final mold.
After the mold was fully prepped we took aluminum tape to create the rest of the part. Basically the part needs draft, so using the tape is much faster and easier to shape for portions of the mold that we don’t care about. Plus it doesn’t really stick to the fiberglass, so that helps as well.
I believe that there will be two more parts to this project, one more for the mold making and one more part for the final part that we pull off the mold. Check back soon!
Well, I always find my way into various projects. It is funny, the more things you say yes too the more that you can learn. So with that in mind I set off to make a new dash for the Kern Racing Pikes Peak EVO.
For those of you not familiar with this car, I have built a few parts for the Kerns already. Last year I worked on their Aero Package and in the last few years the Kerns, piloting this car, have held the record for the Time Attack 4wd class at Pikes Peak. This team is unstoppable with the proper equipment and I am happy to be able to help them with their quest.
This year they are switching to Pikes Peak Open. This allows them a few more options in lightening the vehicle. Weight is a huge advantage in racing. Lotus has a saying “performance through light weigh” this saying just means that you don’t need as much power if you have less to move. So with the new possibilities every option needs to be considered. So Dave has been working on ideas. Remove brackets, replace windows with lexan, remove lights, remove dash…. wait. We can’t remove the dash, we need that to block reflections from the windshield. we need it to hold critical components like the speedometer and switches that we need. So instead it needs to be a composite dash of some sort. Now to give you an idea, the current dash weighs in at 38lbs. That is a lot of weight! Why does it weight that much you ask? Well, glovebox, vent plumbing, plastic bits, tabs, mounting brackets and more stuff that isn’t needed in a race car all add up pretty fast. With a carbon dash, we should be able to get that down to about 2 lbs! 36lbs of weight savings!
So to start I began with the original dash. This is to provide the form of the dash that we will end up with rather than try to duplicate it out of foam. The first steps were to mount this to a board, and begin creating the form of the underside of the dash. This dash will have a slightly different shape than the original in order to minimize material and make it very stiff and light.
I started shaping the foam and coating it with bondo in order to create a nice solid surface to create the mold from. Any factory dash is going to have texture to it and I needed to eliminate that texture. So coating it with bondo while starting to fill in the holes was pretty crucial. We are eliminating all of the vents on this dash except for the defrost vent. This one we will still need!
After the first layers of bondo a lot of sanding goes on, I kept smoothing this thing down so that the dash shape stays the same. I don’t want to lose the form of the dash while slathering it with all this bondo, so I figure work my way up slowly. Once I got to a point that I felt comfortable I started filling in gaps. Vents on the sides were the first stop.
The vent holes on the front needed to be filled next, so a piece of foam went in and bondo was applied over top. This is a bit complicated because we really want to make sure the shape holds true to the shape that the dash gives us already. The last thing I’d want is for someone to be able to identify where the vents were at one point.
Slowly I built up layers and sanded them back to get the shape correct. Over a few attempts I got this thing pretty close.
I am sure you can see that there are a lot of colors going on now. Primer grey, bondo (grey), glazing putty (white) and the actual dash (black). All these colors start taking away the visual cues of the lines that you are looking for when you are trying to make a part. So the best plan is always to coat it again every once and a while. get a good idea what it looks like in one color and start working hard at the areas that need improvement. I knew that I wasn’t ready to be done, but I really wanted to see where I needed to work the hardest so I did a quick coat of primer. Nice and heavy and this time I did black so it would give a good visual indicator.
I am sure you can see that there are some inconsistencies in this thing. It isn’t perfect by any means and it isn’t perfectly straight or anything. But this is getting very close. I have a bit more sanding to do, I have a bit more bondo to do and hopefully in the next day or two I will be able to finish up this part of the project so I can start waxing it and pulling a mold off this buck. Check back for the next part. If you have any questions, post them up! I’ll try to answer them.
Oh, notice as well, all the seams are filled, all the switch locations are filled and everything is pretty close to smooth. Details are next!