Making a Rack

I built up a Schwinn a week or so ago and I just simply need something to carry my groceries on the back of it. There are lots of racks out there but… well I can’t leave well enough alone. So I had some extra steel at the shop and I also found a 1950’s High explosives box that John Grimberg gave me for this project as well.

Today I headed down to the shop to get started on this one. I don’t have all the parts that I need just yet but it is a great start. I started off with some 3 inch rings that I bought for this project. I could have bent the material, but it was definitely cheaper to buy rings and make corners out of those than it was to buy an Oxy-Ace torch!

Cruiser Rack

With the rings I just cut down some material and sanded it down to get a proper fit to my dimensions.

Cruiser Rack

In an effort to make this thing as square as possible I took my time and welded up each side using a template that I made in order to make sure they all end up at the same dimension. There is nothing quite as frustrating as getting some arbitrary pieces that aren’t square or matched in size. So these are all matched up and ready to go.

Cruiser Rack

With that done I measured out the dimensions on our welding table and tacked some ends down in order to make sure the dimensions stayed accurate then I cut the ends and tacked those in. I had the bike down there to keep an eye on things as well.

Cruiser Rack

Once the first ring was finished I clamped the sides of the second ring directly onto the finished first ring then tacked up the ends on that as well, it left me with two matched rings that will form the bottom and top of the rack.

Cruiser Rack

I called it a day after that. I need to get a 3 inch diameter tube soon in order to finish this project or I need to roll some sheet metal to a 3 inch diameter. Then I just need to weld up the top and bottom of the rack, set it up on the bike and fabricate the connections to the bike. I have some ideas for how that is going to work but I think I will cut a cardboard template in order to get it right the first time. Once all of that is done and welded I will then finish the steel and inset some wood on the sides. Hopefully it will finish up nicely and give some good character to the bike!

Cruiser Rack

Check back soon for the final product!

Anthem Branding

I have been doing some tinkering in the shop! Last year I had the opportunity to help with the design of Anthems new space. Jeremiah and I had the chance to measure, analyze and design a new space. We got to be creative and we got to make some cool stuff. In the end I had the chance to put a lot of input into the front receptionist desk and some other elements of the space. It was a great opportunity and I really enjoyed working with him on the project.

Anthem Offices

This year however Anthem Branding has expanded, their space has stayed the same and they are trying to figure out how to get more people into their space! Jeremiah has been working in New York so I stepped up to help out. We talked about a lot of options and we ended up with the simplest options. Two very large library tables. With two tables each with three 40 inch sections we could house 12 people in the same space that seven people were occupying now.

I sent over some final drawings of the space and they were sold. so construction began!
AnthemDeskv3

This is the largest project that has come out of the “creation station” so far, at least in physical size! 4ftx10ft tables! With minimal flat surfaces to work with around the shop it was an interesting experience getting everything squared up.

Anthem Table

Anthem Table

Anthem Table

The design is intended to be raw, very simple materials, exposing the materials for what they are. Exposed welds and nice wood grain. I spent a bit of time getting things straight, square and sturdy. I choose 16g 2 inch square tubing. It came out nicely with some nice heat coloration from the MiG welds.

Once the two bases were built I cut down the wood to six 40inch sections and put a coat of finish on the bottom of each board. Everything mounted up square and nice so I routed a nice 1/8inch round over on the edges that met between each board and bolted them all in place on the tables. Once they were all attached I did a 3/8 roundover around the entire outside edge of the tables. This provides a friendly feel for the end users when they are at the table, rather than just a sharp machined edge. After a bunch of sanding and a bit of masking they all got 4 coats of finish. They all came out nice and smooth. Perfect finish and I think that they will hold up for quite a while.

IMG_6645

IMG_6646

You can see my nice cardboard cot under the one table, at one point it was easier to just stay at the shop…

I was able to borrow a friends Sprinter Van to deliver the tables, the delivery went smoothly, everyone involved realized how much steel and baltic birch weighs very quickly. Now that it is installed it looks perfect in the space. Anthem is still working out a few finishing touches for their new space, but overall I am very satisfied with their new tables and they seemed to be enjoying them as well.

Anthem Offices

Anthem Detail

Anthem Details

Anthem Offices

Anthem Offices

Another fun project in the works. I do enjoy designing and building these spaces! It is really fun to see it all come to life.