Progress on the EVO

Well when Dave Kern starts something he is most likely going to finish it. I mean seriously. His wife Allison recently recounted the time that the motor blew during a race, fire was shooting out of the hood, over the car in large balls of glowing heat and she had to tell him that it was over, they had to pull over. Well, this same determination goes for fabrication of the ultimate race car too.

This years car features a complete composite body, about half of which is being fabricated by Dave with a bit of help from me. The other half are commercially available parts. The new car will feature larger, stickier tires, more elaborate aerodynamics and a full flat bottom to also aid in the aero. Wow, it is a ton of work and wow I wish I had more time to help him out because I feel bad that he is going at most of this alone!

Check out some photos from the build so far.

IMG_9332

Untitled

Untitled

IMG_9267

IMG_9268

IMG_9277

My composites professor from Metro has decided to tackle the front aero. With a brand new splitter that should actually weigh about 1/3rd of the weight of the current splitter… well this thing should be mean

IMG_9179

IMG_9180

Check back for more and check in with RaceKern for even more details on the build.

Carbon EVO Dash | Part 2

I don’t know why I forget this stuff, but I am remembering how much work making a mold is… Yeah. It is one of those things that I remember when I really think about it, but when I haven’t done it for a while I convince myself that it will just take a few hours.

If you haven’t seen part one of this build check it out here. This time I have been going layer after layer, working my way up and trying to get a nice smooth final product. There have been some tricky parts like the airbag area and the vent holes. In addition the portion that I have made with foam is a bit tricky as well, occasionally when you get beyond the bondo layer you find out what happened very quickly when you hit the soft foam! I reached a point where I needed a much better visual indicator of what was going on. So I had to put a coat of glossy paint on in order to see the lines better than I could with the flat primer. So I chose a red paint and painted it up. It gave away some issues immediately. There were some sanding marks that were a bit deeper than anticipated, some waves that I needed to sort out and basically it just did exactly what it needed to do.

Carbon EVO dash project

Carbon EVO dash project

Carbon EVO dash project

So I did a full wet sand on the part and really smoothed it out. some spots got all the way back to bondo again through the paint layer and the primer layer. Once I got it all smoothed out another layer of glossy red and WOW! what a difference! It looks very good right now. There are a few little imperfections, they are all pits and will actually be easier to fix in the mold itself so I am going to leave them and sand them out of the final mold.

After the mold was fully prepped we took aluminum tape to create the rest of the part. Basically the part needs draft, so using the tape is much faster and easier to shape for portions of the mold that we don’t care about. Plus it doesn’t really stick to the fiberglass, so that helps as well.

Carbon EVO dash

Carbon EVO dash

Carbon EVO dash

I believe that there will be two more parts to this project, one more for the mold making and one more part for the final part that we pull off the mold. Check back soon!

AXYS Vehicle concept

I was fortunate enough to be selected to be part of the AXYS vehicle concept design and build team. This is a hand selected program at Metro State College of Denver. The premise of this project is to build an entire composite vehicle, design all the elements of the vehicle (except the body shape) and present the vehicle to the public by the spring of 2010.

Side Rendering

The presentation portion of this will be a soft presentation, the vehicle will not be fully functional at that time and the interior will not be completed, but most of the design should be finished and the vehicle should be presentable enough to show off what it is going to be in the end.

Overall this is quite the process there is an incredible amount of work to do including sanding, finishing and forming this whole thing by hand. The vehicle is going to be a two seat vehicle that leans in corners. Here is a quick rendering of the vehicle from its initial design.

Side Rendering

We are working on a website for the project right now as well. The URL is www.carbonarts.com and I invite you to check it out. Once the site is up and running we should have updates regularly to keep you informed!

In the mean time, we will be laying up fiberglass and sanding down bondo more frequently than you can imagine!

IMG_6152