Anthem Branding

I have been doing some tinkering in the shop! Last year I had the opportunity to help with the design of Anthems new space. Jeremiah and I had the chance to measure, analyze and design a new space. We got to be creative and we got to make some cool stuff. In the end I had the chance to put a lot of input into the front receptionist desk and some other elements of the space. It was a great opportunity and I really enjoyed working with him on the project.

Anthem Offices

This year however Anthem Branding has expanded, their space has stayed the same and they are trying to figure out how to get more people into their space! Jeremiah has been working in New York so I stepped up to help out. We talked about a lot of options and we ended up with the simplest options. Two very large library tables. With two tables each with three 40 inch sections we could house 12 people in the same space that seven people were occupying now.

I sent over some final drawings of the space and they were sold. so construction began!
AnthemDeskv3

This is the largest project that has come out of the “creation station” so far, at least in physical size! 4ftx10ft tables! With minimal flat surfaces to work with around the shop it was an interesting experience getting everything squared up.

Anthem Table

Anthem Table

Anthem Table

The design is intended to be raw, very simple materials, exposing the materials for what they are. Exposed welds and nice wood grain. I spent a bit of time getting things straight, square and sturdy. I choose 16g 2 inch square tubing. It came out nicely with some nice heat coloration from the MiG welds.

Once the two bases were built I cut down the wood to six 40inch sections and put a coat of finish on the bottom of each board. Everything mounted up square and nice so I routed a nice 1/8inch round over on the edges that met between each board and bolted them all in place on the tables. Once they were all attached I did a 3/8 roundover around the entire outside edge of the tables. This provides a friendly feel for the end users when they are at the table, rather than just a sharp machined edge. After a bunch of sanding and a bit of masking they all got 4 coats of finish. They all came out nice and smooth. Perfect finish and I think that they will hold up for quite a while.

IMG_6645

IMG_6646

You can see my nice cardboard cot under the one table, at one point it was easier to just stay at the shop…

I was able to borrow a friends Sprinter Van to deliver the tables, the delivery went smoothly, everyone involved realized how much steel and baltic birch weighs very quickly. Now that it is installed it looks perfect in the space. Anthem is still working out a few finishing touches for their new space, but overall I am very satisfied with their new tables and they seemed to be enjoying them as well.

Anthem Offices

Anthem Detail

Anthem Details

Anthem Offices

Anthem Offices

Another fun project in the works. I do enjoy designing and building these spaces! It is really fun to see it all come to life.

Lakewood Cultural Center: Furniture show

About a month ago I received a call about a chair I made a year ago. The call was asking whether or not I would be interested in putting my chair in a furniture show. OF COURSE! I would love to was my response! So lets talk about the chair.

IMG_3325

I started this project for an “Intro to Woodworking” class at Metro. Chase Deforest was the professor for the class and she was encouraging people to make small tables for a final project. I was set on a chair. Not only that, but I like mixing media so I wanted to incorporate some aluminum with the project. So I started working on some sketches. The chair developed quickly with a large heavy footprint and a light open seating area. I choose Hard Maple, Aluminum and 1/2 inch clear acrylic for my materials list.

The construction went fairly smooth. Large exposed joints came together to form the legs and the arm rails. Hours in the machine shop passed by as I machined the standoffs and the acrylic…well, I ordered that.

When I designed the standoffs I did so with the intention of learning how to make them. Every part I design at this point I do in order to learn how to make it. When I approached John, a good friend of mine, about the project he said “no problem!” So he showed me the Radius tool that he has and how to use it. I machined all the pieces pretty quickly.

Machine shop, radius tool
Machine shop, radius tool

Construction went smoothly and the chair came together quickly. The standoffs turned out perfect!

Completed standoff
Completed standoff

After assembling the chair the next challenge was to actually sit on it. What happens if it breaks! It is a bit disconcerting to sit on a clear acrylic seat for the first time, but I sat down and was pleasently surprised. It worked! In fact it worked very well.

Completed chair
Completed chair

The chair is currently in the Lakewood Cultural center. A reception was held earlier this month to allow artists to talk to visitors about the pieces.

Lakewood cultural center
Lakewood cultural center

Now I am working on a few new projects, hopefully I will be able to make time to get them done too!